GERMANY - ITALY - USA - JAPAN - SOUTH AFRICA - THOR PERSONAL CARE  


<< BackIndustrial - USA/Canada




 

Product Name
Chemical Constitution
Application
*** Product also available in Canada
ACTICIDE® 14 *** Solution of CIT and MIT Concentrate for formulation, water treatment, paper manufacture, metalworking fluids and petroleum industry
ACTICIDE® 45 *** Liquid octylisothiazolinone Provides fungal protection in both wet state and dry film applications
ACTICIDE® B 20***

ACTICIDE® BW 20***
Glycol based benzisothiazolinone

Aqueous based benzisothiazolinone
(Zero VOC)
Wet state biocides for the control of microorganisms, particularly in higher pH systems.
ACTICIDE® CBM 2 Aqueous blend of chlorinated and non-chlorinated isothiazolinones and benzisothiazolinone Synergistic blend providing wide spectrum of activity against bacteria and fungi, for use in water based products
ACTICIDE® CT ***
ACTICIDE® LG ***
Aqueous blends of chlorinated and non-chlorinated isothiazolinones with unique non-metal salt stabilization systems
(Zero VOC)
For wet state preservation of water based products such as paints, coatings, adhesives, inks and polymers. Approved for use in craft products by the ACMI.
ACTICIDE® DBU 20 A 20% solution of 2,2-dibromo-3-nitrilopropionamide (DBNPA) Rapid kill biocide for the control of bacterial, fungal and algal growth in industrial water systems and elimination of contaminants from water based products. Breaks down into harmless degradation products
ACTICIDE® GA *** Aqueous blends of chlorinated and non-chlorinated isothiazolinones and 2-bromo-2-nitro-1, 3 propanediol
(Zero VOC)
Combination wet state biocide for water based products. The active ingredients provide a wide spectrum of activity against both bacteria and fungi, including species that are difficult to control. This blend is particularly effective against pre-existing contamination. Approved for use in craft products by the ACMI.
ACTICIDE® IMS Glycol based combination of 2-methyl-4-isothiazolin-3-one (MIT) and 3-iodopropargyl-N-butylcarbamate (IPBC) Wet state biocide for the control of microorganisms in aqueous formulations susceptible to fungal deterioration
ACTICIDE® IOA Aqueous dispersion of 2-n-octyl-4-isothiazolin-3-one (OIT) and 3-iodopropargyl-N-butylcarbamate (IPBC) with Thor AMME™ Dry film biocide for the protection of coatings against fungal deterioration
ACTICIDE® IPS 20

ACTICIDE® IPS 40
Solvent borne 3-iodopropargyl-N-butylcarbamate (IPBC)
ACTICIDE® IPW 50 Water based dispersion of 3-iodopropargyl-N-butylcarbamate (IPBC)
ACTICIDE® IPA 20 Dispersion of IPBC with Thor AMME™ To protect interior and exterior coatings, timber protection products, adhesives, fillers and sealants from fungal growth. Particularly suitable for the long term protection of wood coatings from surface mold growth
ACTICIDE® L 30 *** 30% solution of 2-bromo-2-nitro-1, 3- propanediol (bronopol)
ACTICIDE® LA family Aqueous blends of chlorinated and non-chlorinated isothiazolinones and 2-bromo-2-nitro-1, 3-propanediol
(Zero VOC)
Combination wet state biocides for water based products. The active ingredients provide a wide spectrum of activity against both bacteria and fungi, including species that are difficult to control. These blends are particularly effective against pre-existing contamination. Approved for use in craft products by the ACMI.
ACTICIDE® MBS family Aqueous synergistic blend of methyl and benzisothiazolinone This patented blend is a unique combination wet state biocide with activity across a broad pH range, stable to 800C, and with reduced sensitivity.
ACTICIDE® MBL Water borne formulation of MIT/BIT and Bronopol VOC and CIT free biocide combining rapid microbiological activity with long term preservation of a wide range of water based products
ACTICIDE® OTA 20 Novel fungicide based on OIT with Thor AMME™ To protect aqueous based coatings and other products from fungal growth
ACTICIDE® OTW

ACTICIDE® OTW 45
Aqueous dispersions of octylisothiazolinone
(Zero VOC)
Provides fungal protection in both wet state and dry film applications
ACTICIDE® PA Aqueous fungicide/algicide combination An enhanced dry film fungicide/algicide for exterior coatings. This water based, VOC free biocide provides protection to a wide product range intended for varied climatic conditions
ACTICIDE® MKW 2 Novel fungicide/algicide with Thor AMME™
ACTICIDE® MV *** Water borne CIT/MIT formulation (sodium nitrate stabilized, bivalent metal free) For formulations incompatible with bivalent metals, e.g. urethane/styrene acrylic emulsions and other polymer emulsions
ACTICIDE® MV 14 *** Concentrated formulation of CIT/MIT For wet state protection of aqueous formulations, for industrial water treatment and the formulation of preservative products
ACTICIDE® PLN 9 2-n-octyl-4-isothiazolin-3-one (OIT) in Diisononylphthalate A broad-spectrum biocide for the protection of plasticised PVC and similar products from bacterial and fungal growth
ACTICIDE® PLN 45 2-n-octyl-4-isothiazolin-3-one (OIT) in Diisononylphthalate A broad-spectrum biocide for the protection of plasticised PVC and similar products from bacterial and fungal growth
ACTICIDE® RS*** Aqueous CIT/MIT formulation (magnesium and copper nitrate stabilized) VOC-free biocide for aqueous formaldehyde sensitive formulations. Particularly stable in hot climates.
ACTICIDE® SPX *** Aqueous CIT/MIT formulation (magesium nitrate stabilized) VOC-free biocide for aqueous, formaldehyde sensitive formulations
ACTICIDE® WP *** Aqueous CIT/MIT formulation (metal free)



Product information is for general guidance only - please contact your local Thor Group Company for Product Data Sheets and technical advice. A wide range of other products is available for specialised applications and to meet local conditions and regulations.